This adapter allows you to add a standalone engine management system to your project that is utilizing factory 1986-1993 Ford Mustang wiring.

Ford Mustang 1986-1993 M.F. Plug and Play Adapter is compatible with the following:

• 1986-1993 Ford Mustang 5.0 - Manual Transmission 
  
• 1986-1993 Ford Mustang 5.0 - Automatic Transmission (AOD)

Benefits:

• Utilizes the factory wiring and sensors
• Retain all factory instrument gauges
• Retain all factory controls (e.g. cruise control and air conditioning)
• Easy installation as most installations can be done in under two hours
• 2 x CAN BUS connections built into the Main Harness

Now Supporting:

• Aftermarket ignition systems (e.g. Holley Dual Sync or Cam/Crank trigger setup). Please note you will need to modify some wiring for the tachometer to function
• Two channels for conversion of Variable Reluctance (VR) to Hall Effect signal. One channel is designated for factory Vehicle Speed Sensor (VSS). The other channel is open for use with customer modifications to wiring (e.g. it could be used for traction control by adding a front wheel speed sensor).
  

Optional Sensor Connections:

• Fuel Pressure
• Oil Pressure
• Manifold Air Pressure
• Flex Fuel

For the optional sensors we have wired our sub harness to work directly with Low Doller Motorsports sensors. 

Flex Fuel requires the use of a Continental 13577379 or 13507129 sensor.

Included in the box:

• 1 x M.F. Adapter
• 1 x M.F. Main Harness
• 1 x M.F. Sub Harness

Not included:

• Standalone ECU
• Standalone ECU Power Harness
• Wideband Oxygen Sensor
• Other Standalone ECU Optional Components (e.g. Digital Displays)
  
  

Electric Fan Control (optional):

To make installing and controlling an aftermarket electric fan easy, the M.F. Adapter utilizes pin 41 on the Factory ECU connector as a ground trigger for a relay.

Transmission:

The 1986-1993 Ford Mustang did not utilize a computer controlled transmission (e.g. AODE). If your project has an AODE/4R70W or any other computer controlled transmission, you will need to order the correct transmission harness from Holley directly or one of their suppliers.

Notice:

M.F. Kustoms, LLC prohibits the use of its products on emission controlled vehicles. All parts are sold for OFF ROAD, RACE-ONLY, ground-vehicle use purposes only.